| post date: | jan 04,2022 |
| expiry date: | jul 03,2022 |
| detailed description: |
product name: release agents for die casting molds model: silibasera-4zal usage description: ● the recommended usage (dilution ratio): general processing: 1:120, complex processing: 1:100. please according to the technology personnel deployment test concentration, finally to determine the best dilution ratio! ● the typical usage: 1kg release agent mixed with 100kgs purified water or mixed with 100 ~ 120 kgs diesel oil. ● if b e y o n d the typical usage, please contact us for technical support. ● please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid. ● unless the technical services allow outside, cannot add other material to concentrate and diluent. after dilution with water, it is milky white liquid. ● the concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage. technical indicators of silibasera-4zal release agents for die casting molds: odor：non strong smell density：0.85g/ml appearance：transparent red brown liquid working temperature：150℃-200℃ flash point (coc)：not applicable refraction coefficient@20℃：1.2 freezing point：-10℃ ph (5% dilution)：7 notify of silibasera-4zal release agents for die casting molds: ● die-casting mold release agents must dilute with pure water or diesel oil, dilution ratio 1:100 ~ 1:120, gently shake or stir well before use; dilution ratio according to complexity of the casting and mould deep make appropriate adjustments. ● the spray gun or automatic system pay attention to spray evenly and blow dry. ● the best mould working temperature is 150 ℃ to 200 ℃. ● die-casting mould release agent under normal temperature storage, pay attention to prevent frostbite prevent bask in, after opening attention hermetic seal good keeping. packing and shelf life: 20kgs/barrel, 170kgs/drum, sealed and stored at room temperature for at least 18 months from manufacture date. |
